Operating instructions

Maintenance and service
12.4 Removing and installing hardware components
SIMATIC Panel PC 677B
Operating Instructions, 05/2007, A5E01035609-01
119
Removing the Compact Flash card
How to remove a Compact Flash card
1 Open the board slot.
2 Press the eject button, for example
with the cover of the module slot, and
remove the Compact Flash card.
3 Open the module slot.
12.4.7 Installing/removing an additional Compact Flash card
Notice
We highly recommend that use use approved SIMATIC Compact Flash cards. Siemens
disclaims any liability for impairment of functions caused by the use of third-party cards.
Preparation
Disconnect the device from the mains.
Note
The use of the Compact Flash adapter excludes the simultaneous use of a hard disk.