Operating instructions

Maintenance and service
12.4 Removing and installing hardware components
SIMATIC Panel PC 677B
Operating Instructions, 05/2007, A5E01035609-01
115
12.4.5.4 Installing / removing hard disks
Removing 2.5" drives
How to remove a 2.5" drive
1 Remove the drive bay module.
2 Loosen the screw (1) of the
drive.


3 Remove the hard disk drive and the steel mounting bracket from the bay.
4 Disconnect the power supply and the data cable from the drive.
Removing a 3.5" drive
How to remove a 3,5" drive
1 Remove the drive bay module.
2 Disconnect the power supply and the data cable from the drive.
3 Loosen the screws (1) on the
drive.


4 Remove the hard disk drive from the bay.
Note
Note that special screws with inch threads (6-32 x 3/16'' St G3E) are used!