Technical data

Configuring the Computing Unit
5-12
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
5.1.2 The Advanced Menu
Menu structure
PhoenixBIOS Setup Utility
Item Specific Help
ESC EXIT
Select Item
Select Menu
+ / –
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit
Sub-Menu
Main Security Power
Advanced
Installed O/S:
[Other]
Reset Configuration Data: [No]
Local Bus IDE adapter:
Floppy disk controller: [Enabled]
[Primary & Secondary]
Large Disk Access Mode:
[DOS]
Memory Gap at 15 Mbyte: [Disabled]
COM / LPT Configuration
PCI Configuration
Hard disk Pre-Delay: [Disabled]
EXITBoot Sequence Version
Setup Warning:
Setting items on this menu to incorrect values
may cause your system to malfunction.
F1 Help
Peripheral Configuration
Figure 5-9 The Advanced Menu
Settings in the Advanced Menu
Field Meaning
Installed O/S Plug&Play means that fitted modules are automatically detected and
installed, providing they support Plug&Play functions.
Other The BIOS handles the entire Plug&Play capability, (default
setting)
Win98 The operating system handles some of the Plug&Play
functions
Reset
Configuration
Data
Yes All installations under Plug&Play are deleted and the
configuration is triggered the next time the system boots.
Then entry is then reset to No. System components that do
not support Plug&Play have to be entered manually.
Floppy disk
controller
Enables or disables the floppy controller of the basic board
Local Bus IDE
adapter
Primary One IDE interface for max. two drives.
Secondary One IDE interface for max. two drives.
Primary & Secondary
Two IDE interfaces for max. four drives.
Disabled No local IDE interface.