Technical data

Configuring the Computing Unit
5-3
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
After BIOS Setup has started, the following dialog box appears on the screen:
PhoenixBIOS Setup Utility
Item Specific Help
System Time:
ESC EXIT
TAB
System Date:
[ 15:35:32 ]
Select Item
Select Menu
+ / –
Enter Select
Change Values
Sub-Menu
F9
F10
Setup Defaults
Save and Exit
Shift Tab F0 5A, or
selects field.
Diskette A:
[ 1.44 MB, 31/2” ]
Primary Master
[4326 MB]
Primary Slave
[None]
Memory Cache:
Boot Options
Keyboard Features
[Write Back]
Hardware Options
System Memory:
Extended Memory:
Main Security Power EXIT
Menu bar
Operator control bar
Help window
Selectable
submenu
Advanced
Secondary Master
[None]
Secondary Slave
[None]
[ 01/23/1999 ]
640 KB
64512 KB
Title bar
Example:
Hour/Minute/Second
Month/Day/Year
Boot Sequence Version
F1 Help
Figure 5-1 Menu SETUP Main
Menu structure
The screen is split into four sections. In the top section, you can select the
different menu screens. In the left of center section, you can choose the
different settings or submenus. In the right of center section, you are given
small pieces of help information on the menu option you have currently chosen.
The bottom section contains notes on the functions of keys.
You can move between the menu screens using the arrow keys ← LEFT and →
RIGHT.
Menu Meaning
Main System functions are set here
Advanced An extensive system configuration can be performed here
Security Security functions are set here, for example a password
Power Savings Power conservation functions can be chosen here
Boot Sequence The boot priorities are set here
Version Here you will find information about the version of the computing unit
EXIT Used for exiting and saving