Technical data

Preface
vi
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
Training Center
To help you become familiar with SIMATIC S7 programmable controllers, we offer
training courses. Please contact your regional training center or the central training
center in D 90327 Nuremberg.
Phone: [phone]
Infoline: Tel. [phone]
Fax. [phone]
Internet: http://www.sitrain.com
E–Mail: AD–[e-mail]
For information on high–availability SIMATIC S7 automation systems, the H/F
Competence Center in Nuremberg offers a special workshop. The H/F
Competence Center will also support you during configuring, start–up and in case
of any problems occurring at site.
Phone: +49 – (0) 911 – 895 – 4759
Fax: +49 – (0) 911 – 895 – 5193
E–Mail: hf–[e-mail]
CoC–[e-mail]
Technical Support Online Services
SIMATIC Customer Support provides you with a wide range of additional
information on SIMATIC products in the online services:
S You can obtain general up–to–date information as follows:
– on the Internet: address http://www.siemens.de/simatic–net
– at fax polling no. [phone] 00
S For current product information, FAQs, tips and hints and downloads which may
be helpful for your application, see:
– On the Internet: address
http://www.siemens.de/automation/service&support
– From the bulletin board system (BBS) in Nuremberg (SIMATIC Customer
Support Mailbox) at the number [phone].
To dial the mailbox, use a modem with up to V.34 (28.8 Kbaud), with the
following parameters: 8, N, 1, ANSI, or dial on ISDN (x.75, 64 Kbits).