Technical data

Computing Unit Expansions
4-21
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
4.5.3 Removing and Installing the Floppy Disk Drive
1. Remove the hard disk mounting as described in section 4.5.1.
2. Undo the interlocking of the controller flexible cable on the motherboard and pull
the flexible cable out of the plug connection.
3. Undo the two fixing screws (TORX T8) on the system housing.
4. Lift the floppy disk drive upwards out of the housing.
5. Proceed in the reverse order to install the new drive. The new drive must be of
the same type as the one removed.
Floppy disk drive fixing screws
Figure 4-16 Installing the floppy disk drive