Technical data

Computing Unit Expansions
4-16
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
Aligning the device for holding down the modules:
To install the device for holding down the modules, perform the following steps.
1. Insert the slide element through the guide slit until it is resting firmly on the
module. The module must now be introduced into the notch.
Caution
Do not exert pressure on the module! Therefore, do not use force to press the
slide module onto the module.
2. Remove the surplus slide element:
– Score the slide element at the top edge of the support with a knife and snap
it off.
– Nip off the surplus with a sharp side cutter.