Technical data

Setting Up and Operating the Computing Unit
3-16
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
Floppy disk handling with floppy disk drive
Insert the floppy disks into the drive as illustrated, depending on the installation
location:
Access light
Eject button
Eject button
Access light
Drill hole for emergency ejection (LS120 only)
Figure 3-11 Handling Floppy Disks
The access light is on when the drive is being accessed.
Emergency removal with the LS120 works in the same manner as with the
CD-ROM drive. Refer to section 3.6.1 for details.
Caution
Caution: This could result in loss of data!
The eject button must never be pressed while the green LED on the drive is on.
LS 120 drives are very sensitive when it comes to unacceptable vibrations. During
operation, vibrations might damage the drive and/or the data medium. (Refer to
section B for permissible values.)