Technical data

Commissioning
2-3
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
2.2 Installing the Item Supplied
The item delivered to you is particularly suitable for installation in consoles,
cabinets and panels.
The device complies with the requirements for a fire enclosure to EN60950. It can
therefore be installed without an additional fire enclosure;
Please observe the following points when installing your device:
S Avoid extreme environmental conditions whenever possible. Protect your device
from dust, moisture and heat.
S Do not expose your device to direct sunlight.
S The device must be installed in such a way that it presents no danger of any
kind (for example, by tipping over).
S The clearance around the device must be at least 100 mm to make sure it is
sufficiently ventilated.
S Never cover the ventilation slots.
S Observe the installation locations allowed when you install your device.
!
Warning
If systems are installed at a non-approved installation location, the approvals to
UL 1950 and EN60950 are no longer valid!