Technical data

Configuring the Computing Unit
5-27
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
Documenting your device configuration
If you have made any modifications to your SETUP settings, you can enter them
in the following table. You can then refer to these entries if you need to make
any hardware modifications later.
System Parameters Standard Settings Your Entries
Main
System Time hh:mm:ss
System Date MM/DD/YYYY
Disk A: 1.44 MB, 3 1/2” / for LS 120:
Disabled
Primary Master C: 4326 MB
Primary Slave None
Secondary Master None
Secondary Slave None
Memory Cache Write back
Boot Options
Quick Boot Mode Enabled
SETUP prompt Enabled
POST Errors Enabled
Floppy check Disabled
Summary screen Enabled
Keyboard Features
Num Lock On
Key Click Disabled
Keyboard auto-repeat rate: 30/s
Keyboard auto-repeat delay 1/2s
Hardware Options
PCI-MPI/DP: Enabled
On Board Ethernet Enabled
Ethernet Address 08000624xxxx
Cardbus/PCMCIA Slot Enabled
SafeCard Functions Enabled
Legacy USB Support Disabled
CRT/LCD selection SIMULTAN
CRT 640 x 480 75 Hz
CRT 800 x 600 75 Hz
CRT 1024 x 768 75 Hz
LCD Screensize Graph&Text Expanded
DSTN Contrast 154
Trackball / PS2 Mouse Auto
Advanced
COM/LPT Configuration
Internal COM1 Enabled
Base I/O address 3F8
Interrupt IRQ4