Technical data

Configuring the Computing Unit
5-14
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
MeaningField
Internal COM2 Disabled The resources assigned to an interface are freed.
Base I/O address Sets the base input/output address. It is preassigned and
recommended accordingly.
Interrupt Sets the interrupt. It is preassigned and recommended
accordingly.
Internal LPT1 Disabled The resources assigned to an interface are freed.
Mode Use this setting to set the operating mode of the printer interface.
Make sure that the setting matches the data terminal you
connected. Refer to the documentation for the device for the
setting.
Base I/O address Sets the base input/output address. It is preassigned and
recommended accordingly.
Interrupt Sets the interrupt. It is preassigned and recommended
accordingly.
PCI Configuration
PhoenixBIOS Setup Utility
Item Specific Help
ESC EXIT
Select Item
Select Menu
+ / –
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit
Sub-Menu
PCI Configuration
PCI/PNP ISA IRQ Resource Exclusion
PCI IRQ line 1:
PCI IRQ line 2:
PCI IRQ line 3:
PCI IRQ line 4:
[Auto Select]
[Auto Select]
[Auto Select]
[Auto Select]
F1 Help
Setup items for configuring The
specific PCI device
Advanced
PCI Device, Slot #1
PCI Device, Slot #2
on board PCI Ethernet
Figure 5-11 PCI Configuration Submenu