User's Manual

Industry Sector, IA&DT
SCE Training Curriculum Page 21 of 42 To be used only at Educational and R&D Facilities
PA Module P03-01, Edition 09/2013 Unrestricted / © Siemens AG 2013. All Rights Reserved
P03-01_AdvancedLayout_R1309_en.doc
19. Then, select ‘Axis‘. Here, set the attribute ‘Scale‘ to ‘No‘.
20. In ‘Limits‘, specify the known low and high limit, their monitoring and the color of the
bars if the limit is exceeded. (

Properties

Bar

Limits

Low/high limit: refer to
display/Monitoring: Yes

)