User's Manual

Industry Sector, IA&DT

SCE Training Curriculum Page 2 of 42 To be used only at Educational and R&D Facilities

P03-01_AdvancedLayout_R1309_en.doc

Matching SCE Trainer Packages for these curriculums

 SIMATIC PCS 7 Software block of 3 packages

Order No. 6ES7650-0XX08-0YS5

 SIMATIC PCS 7 Software block of 6 packages

Order No. 6ES7650-0XX08-2YS5

 SIMATIC PCS 7 Software Upgrade block of 3 packages

Order No. 6ES7650-0XX08-0YE5 or 6ES7650-0XX17-0YE5

 SIMATIC PCS 7 Hardware Set including RTX Box

Order No. 6ES7654-0UE13-0XS0

Please note that these trainer packages may be replaced with subsequent packages.

An overview of the available SCE packages is provided under: siemens.com/sce/tp

Continued education

For regional Siemens SCE continued education, contact your regional SCE contact partner

siemens.com/sce/contact

Additional information relating to SCE

siemens.com/sce

Note on Usage

The training curriculum for the integrated automation solution Totally Integrated Automation (TIA) was

prepared for the program "Siemens Automation Cooperates with Education (SCE)“ specifically for

training purposes at public educational and R&D facilities. Siemens AG is not liable regarding the

contents.

This document may only be used for initial training on Siemens products/systems. This means: it may

be copied entirely or partially and handed to trainees for use within the scope of their training. Passing

on or copying this document and communicating its contents is permitted within public training and

continued education facilities for training purposes.

Exceptions require written permission by Siemens AG. Contact person: Roland Scheuerer

roland.scheuerer@siemens.com.

Violators are subject to damages. All rights including translation rights are reserved, particularly in the

event a patent is granted or a utility model or design is registered.

Usage for industrial customer courses is explicitly not allowed. We do not agree to the commercial

utilization of these documents.

We would like to thank the Technical University Dresden, particularly Prof. Dr. Leon Urbas and Annett

Krause MS, as well as the Michael Dziallas Engineering Corporation and those who provided support

in preparing this training curriculum.