Basic Documentation

Entering Synco IC
Sign up - Register a plant
4
10
| 16
Siemens
A6V101064590_en--_e
Building Technologies
2018-09-20
4.2
Sign up - Register a plant
NOTICE
OZW registration
The OZW web server must be connected to Synco IC to register. The operating
LED on the OZW web server flashes as soon as it is connected to Synco IC.
Detailed information on commissioning the OZW web server is available in the
OZW web server commissioning guides (Documents C5701 and C5712), see
Section "Reference documentation [➙ 5]".
Initial registration
You must set up a user account to work with Synco IC. The activation key for a
OZW772, OZW672, or WTV676-HB6035 web server is always required as the first
step.
 Go to the following URL to start Synco IC:
– https://www.siemens-syncoic.com
(for Synco controllers and Sigmagyr controllers RVL4.., RVP3.., RVD2..)
1.
Click "Register" to create a user account the first time you go to the portal.
2.
Enter a personal e-mail address to use as your contact with the portal.
3.
Enter the activation key for your OZW772, OZW672, or WTV676-HB6035 web
server.
4.
Accept the general terms and conditions.
5.
Confirm entries with "Sign up".
6.
NOTICE! You do not receive an e-mail if you are already registered on the
portal.
You receive a feedback that the account was created and that the password
was sent to the e-mail address.
7.
Complete the registration by selecting "Sign in".
Add plants
You can add web servers (OZW or WTV676) in Synco IC after initial registration on
the cloud. You must register plants to add them. Click the link "Register" and
activate the plant using a valid activation key.
Activation of additional plants is also possible via the menu "Administration" >
"Plants" (OZW only). You must sign in before activating plants.
Detailed information on activation additional plants for OZW is available in Section
"Set up end user access to the portal service".
You must use the link "Register" on the start page for initial registration and
activation of plants.