Basic Documentation

Remote Tool Access (OZW)
11
A6V10500249_en--_f 45 | 57
1. Open or create a project.
2. If unavailable, add the OZW in the project in ACS menu "Topology".
3. Select "Connections" in ACS.
4. Select "Ethernet" as the connection type.
5. Enter local IP address as per Remote Tool Access (e.g. 127.0.0.1).
6. Confirm with "Next".
Connect as follows with ETS:
1. Select "New Connection" in ETS.
2. Select connection type "KNXnet/IP".
3. Enter local IP address as per Remote Tool Access (e.g. 127.0.0.1).
4. Confirm with OK.
ACS
ETS