Basic Documentation

Remote Tool Access (OZW)
11
44 | 57 A6V10500249_en--_f
The user logs in to the Remote Tool Access using the same Synco IC user name
and password.
All the user's plants are listed on the overview page. The line displayed for the
plants are
● grayed out, i.e. the plants cannot be accessed,
– if the access level is for end users only
– if the plant is offline
– if the OZW firmware version is older than V7.0
● displayed in black, i.e. the plants can be accessed
1. Select the plant for connection.
2. Click "Connect".
 The software searches for an available local IP address between 127.0.0.1 and
127.0.0.255 connected to the selected OZW via Synco IC using this address.
 It can be used with ACS or ETS as soon as it is connected.
Connect
Procedure