Basic Documentation

Remote Tool Access (OZW)
11
A6V10500249_en--_f 43 | 57
● Web server as of version 7.0
● The user has an account on Synco IC
● Access level is "Service Level" or higher
Program
Remote Tool Access is an independent program. Remote Tool Access is
distributed as part of the ACS CD or can be downloaded at the following URL:
https://support.industry.siemens.com/cs/ww/de/view/109481853
There are two ways to install the Remote Tool Access:
● Together with the ACS790 installation
● Individually
– In the Setup folder, double-click file RemoteToolAccessSetup.exe
– Select the "Remote Tool Access" button in the start routine for ACS790
Some examples of possible uses:
● Commissioning support by technicians without the need to be on site
● Creating a commissioning protocol in the office
● Offsite clarifications on a support call, e.g. automatic comparison of parameter
sets
● Simple remote modifications to the configuration
NOTICE
Actions requiring the buttons be pressed on the devices cannot be performed
remotely (e.g. assigning KNX addresses). Also not possible are any actions
requiring connections in excess of 24 hours (e.g. long-term computer trends).
Requirements
Use