Basic Documentation

Plant management

Set up plant notifications

36 | 57 A6V10500249_en--_f

Trend tiles are sent only one time to the cloud. The selection "Trend file" must be

selected each time to send additional trend files and a timeframe in the future set

for evaluating meter data on the web server

For information on basic data for plant notifications (alarms and reports), see

Section "Basic data [➙ 36]".

Information on alarm messages in available in Section "Alarm-specific settings

[➙ 38]".

Information on the reports (billing and trend files), is available in Section "Report-

specific settings [➙ 38]".

The function "Set up plant notifications" is based on the plant role.

In the tenant area "Siemens Metering", you can set up a plant notification with all

roles with the exception of "Owner".

In the tenant area "Siemens Proxy", you can set up a plant notification with all

roles.

Additional information on switching the tenant area is available in Section "Switch

tenant [➙ 23]".

9.2.1 Basic data

First, complete the basic data and then enter the alarm and report-specific data.

Additional information is available in the Sections "Alarm-specific settings" or

"Report-specific settings".

1. In primary navigation, select "Administration".

2. Click the name of the desired plant.

3. In secondary navigation, select "Plant notifications".

4. Click "Add plant notification".

5. In the entry mask, configure the notification in the section "Basic settings"

6. Select the notification type "Alarm" or "Report".

7. Enter the name of the alarm notification.

8. Enter the recipient. Multiple recipients can be entered, with each e-mail

address separated by a comma.