Basic Documentation

Plant management
Add/remove plant user
9
A6V10500249_en--_f 35 | 57
9 Plant management
9.1 Add/remove plant user
You add a plant user and assign a plant role for this plant.
You must have the plant role "Administrator" or "Owner" to add a user. Detailed
information on plant roles is available in Section "Overview of plant roles
[➙ 55]".
1. In primary navigation, select "Administration".
2. Click the name of the desired plant.
3. Click "Add user".
4. Enter the e-mail address and plant role.
5. Save the information for the new user.
To remove a plant user, select the user and click "Remove".
9.2 Set up plant notifications
Set up a plant notification as end user or installer for your own or a customer plant.
The notification types "Alarm" and "Report" are available as a rule.
You receive an alarm notification in the event of a plant fault.
You receive reports on invoicing, if you have created a corresponding alarm
notification with type "Report".
You receive reports on trends (trend files), if you have selected "Trend file" on the
M-bus web server and set a timeframe in the future for evaluating the meter data.
A trend file is sent to the Synco IC cloud as soon as the web server creates a trend
over this timeframe.
Additional information on trend file settings is available in the M-bus web server
user's guide (Document A6V11157985), see "Reference documentation [➙ 9]".