Basic Documentation

Set up remote access to plant (OZW only)
Set up end user access to the portal service
8
A6V10500249_en--_f 33 | 57
8.2 Set up end user access to the portal service
● You are an installer and want to set up end user access to the portal service.
Plant activation (OZW only)
 You are registered and logged on to the portal (Entering Synco IC [➙ 14]).
 You have the plant role owner or administrator on at least one other plant. The
menu "Administration" is available to you in the portal.
 You have the activation key of the web server. The web server is not yet
activated.
1. In primary navigation, select "Administration".
2. Click "Activate Plant".
3. Enter the "New Activation Key" and "Name" (required fields).
4. Fill in the remaining entry fields with meaningful information.
5. Under "Time zone" enter the time zone of the plant if located in a different time
zone as the operating environment.
6. The setting "On" activates connection supervision.
You are informed by e-mail if the plant if offline.
7. Close the process with "Activate".