Basic Documentation

Remote Tool A
ccess
10
33 |
46
Siemens
A6V11269223_en
--
_e
Building Technologies
2018
-
10
-
30
● Gateway/web server as of version 7.0
● The user have an account on Climatix IC and has its own plant role (no portal
administrators).
● The plant role include the privilege "Remote Tool Access" (typically the plant
roles service, administrator, and owner)
Program
Remote Tool Access is an independent program. The Remote Tool Access is
distributed on the ACS-CD and now together with the OZW/OCI firmware
download.
The ACS-CD can be downloaded at the following URL:
https://support.industry.siemens.com/cs/ww/de/view/109481853
There are two ways to install the Remote Tool Access:
● Together with the ACS790 installation
● Individually
– In the Setup folder, double-click file RemoteToolAccessSetup.exe
– Select the "Remote Tool Access" button in the start routine for ACS790
See "Web server OZW672: Current firmware/software".
Some examples of possible uses:
● Commissioning support by technicians without the need to be on site
● Creating a commissioning protocol in the office
● Offsite clarifications on a support call, e.g. automatic comparison of parameter
sets
● Simple remote modifications to the configuration
NOTICE
Actions requiring the buttons be pressed on the devices cannot be performed
remotely (e.g. assigning KNX addresses). Also not possible are any actions
requiring connections in excess of 24 hours (e.g. long-term computer trends).
Requirements
Download from ACS-CD
Download via firmware
download
Use