User Manual

38/90
Building Technologies M-bus System CE1P5361en
HVAC Products 3 M-bus devices and Siemeca™ AMR 08.02.2007
No Data group (operating page) Description
1 Overview Overview of the plant’s state (faults, limitations,
operating state, process data, setpoints, actual
values, etc.)
2 Status and errors Operating modes, fault indication, indication of
limitations
3 Converter Overview of the setting parameters, plant state,
setpoints and actual values related to the pri-
mary control loop (converter)
4 Heating circuit 1 Overview of the setting parameters, plant state,
setpoints and actual values related to heating
circuit 1
5 Heating circuit 2 (RVD24…) Overview of the setting parameters, plant state,
setpoints and actual values related to heating
circuit 2
6 DHW Overview of the setting parameters, plant state,
setpoints and actual values related to DHW
heating
7 Setpoints Overview of all plant and setting values
8 IOs Overview of all input and output signals
9 Connection conditions Overview of all district heat-specific settings and
limit values
10 Load management Parameter for influencing the space and DHW
heating load
11 Switching programs
(RVD23…)
Time program 1 (RVD24…)
Settings for the switching program of heating
circuit 1
12 Time program 2 (RVD24…) Settings for the switching program of heating
circuit 2
13 Time program DHW Settings for the switching program for DHW
heating or for the circulating pump
14 Global configuration Overview of the configuration parameters
15 Device identification Device-specific information
For more information, refer to the following sections:
8.6 "Data of M-bus devices available on ACS7… "
8.5.5 "Data of M-bus devices stored in the billing file"
8.7 "Error messages from M-bus devices and alarm messages delivered by the
OZW…".
No Data group (operating page) Description
1 Overview Overview of the plant’s state (faults, limitations,
operating state, process data, setpoints, actual
values, etc.)
2 Status and errors Operating modes, fault indication, indication of
limitations
3 Precontrol Overview of the setting parameters, plant state,
setpoints and actual values related to the pri-
mary control loop
4 Heating circuit 1 Overview of the setting parameters, plant state,
setpoints and actual values related to heating
circuit 1
Popcards RVD2…
Popcards RVP97