User Manual

20/90
Building Technologies M-bus System CE1P5361en
HVAC Products 2 System components 08.02.2007
The user can select the columns of the alarm list. The column designations and the ar-
rangement of the individual columns can be configured on a user-specific basis.
The entire alarm list can be exported as an ASCII file. Also, to facilitate further handling in
other programs, the alarms received are automatically exported to an ASCII file.
An overview of the possible alarms from the OZW10 and OZW111 is given in section 8.7
"Error messages from M-bus devices and alarm messages delivered by the OZW…".
The system report is used to monitor plant operation.
It contains general information about the plant, such as type of central unit, phone
number of the plant, and plant name.
The system report can be output on a local printer.
System Report