User Manual

14/90
Building Technologies M-bus System CE1P5361en
HVAC Products 2 System components 08.02.2007
This application is used to visualize the transmitted data points of each device and the
data points‘ values.
Each type of device uses standard popcards. Makeup and contents of the individual
pages are predefined.
User-defined popcards can be created for each device and each node. Data points of
all subordinate devices can be added to popcards that are assigned to a node. Stan-
dard and user-defined popcards can be copied to devices of the same type or to super-
posed nodes.
User-defined popcards offer the following features:
 They can consist of several user-defined pages
 Each page can be subdivided into several user-defined sections
 Freely selectable data points and separators can be assigned to the popcards, the
pages and the sections
Switching between the standard and the user-defined popcards is possible at any time.
Each selected page is automatically updated. The updating process will be visualized.
The operating pages can be printed out and exported as an ASCII file.
Popcard