User Manual

13/90
Building Technologies M-bus System CE1P5361en
HVAC Products 2 System components 08.02.2007
This application permits the graphic presentation of plant (individual devices or groups
of devices) with the following choices:
 Automatic updating of process values in the diagram
 Changing setpoints in the diagram
 In the case of user-defined diagrams, links to other diagrams can be established
A library with standard plant diagrams is assigned to each device type. For all sup-
ported plant diagrams, the library contains:
 The graphic presentation
 The data points to be displayed
 The text to be displayed
The application identifies the selected plant type, automatically assigns the standard
plant diagram and shows the current values.
A user-defined plant diagram can be generated for each device:
 By adopting and adjusting the standard plant diagram
 By creating a new plant diagram
A user-defined plant diagram is created as follows:
 Use external graphic software (e.g. Micrografx Picture Publisher™) for the graphic
presentation. The graphs can be adopted in Bitmap format
 For the inclusion of data points and links, the application has an Editor integrated
All user-defined plant diagrams will be stored in a separate library. They can also be
created without having a connection to the plant (offline).
Switching between the standard and the user-defined plant diagram is possible at any
time.
The plant diagrams can be printed out.
Plant Diagram