User's Manual
Motor components of the built-in motor and options
3.1 Overview of the motor construction
6WDWRUZLWK
FRROLQJMDFNHW
5RWRUZLWK
SHUPDQHQWPDJQHWV
7UDQVSRUWDWLRQORFNV
(OHFWULFDOFRQQHFWLRQV
Figure 3-1 1FW6 motor components with a cooling jacket
Scope of delivery of the built-in torque motor with a cooling jacket
● The rotor is secured in the stator by means of transportation locks and a spacer film
● Stator with a cooling jacket; one cable for the power connection and one cable for the
signal connection with connector or open core ends
● Transportation locks with spacers and screws
● O-rings (x 2) 2)
● Motor rating plate (attached); additional motor rating plate (not attached)
● Safety information
Motors with integrated cooling
These motors are equipped with a ready-to-connect, integrated dual-circuit cooling system,
which provides considerable thermal insulation vis-à-vis the mechanical axes construction.
The dual-circuit cooling system comprises a main and precision cooler
(thermo-sandwich® principle).
An internal cooling circuit (main cooler) dissipates most of the winding losses P
v
of the stator.
A thermal insulation layer between the stator and the mounting flanges of the stator prevents
heat from flowing from the motor winding to the machine construction.
Any heat that does flow through the insulation layer is captured, for the most part, by a
second heat sink (precision cooler) on the flange surfaces and dissipated. This ensures that
the temperature on the mounting surfaces of the stator remains suitably low under all
permissible operating conditions.
1FW6 Built-in torque motors
42 Configuration Manual, 05/2009, 6SN1197-0AE00-0BP3