Operating instructions

Saving Station Numbers, Functions, Procedures and Appointments

Step by Step

Assigning Functions to Keys

Press the key. The LED lights up.

> : Select and confirm.

qme Enter the code.

Press the key. If the relevant key is already pro-

grammed, the programmed function appears on the

screen.

: Confirm.

> : Select and confirm function, for example, "Do not dis-

turb".

All programmable functions appear on the screen. See

Quick-Reference Operating Instructions (Appendix):

section ... about function keys.

if necessary

> : Select and confirm.

Some functions (such as, "Call forwarding") accept in-

complete entries. You must then add supplementary

digits when you activate the function later by pressing

the relevant key.

: Confirm.

> : Select and confirm.

Program/Service

91=Prog. feature key?

Change feature?

Store incomplete feat?

End?

Program another key?

Now press the key to access the function direct-

ly. Certain functions, such as, "Do not disturb",

can be enabled and disabled like radio buttons.

For example, press once to enable the function

and then a second time to disable it.

For information on display messages when sav-

ing functions Æ page 223