HiPath 500 HiPath 3000 HiPath 5000 optiPoint 500 entry Operating Instructions
Before You Begin Before You Begin These operating instructions describe the optiPoint 500 entry telephone on your HiPath 500 and HiPath 3000 / 5000. They describe all functions you can use from your telephone. You may find that some functions you wish to use are not available on your telephone. This may be due to one of the following reasons: • The function has not been configured for your telephone - please contact your service personnel.
Before You Begin Marks The device conforms to the EU guideline 1999/5/EG, as attested by the CE mark. This device has been manufactured in accordance with our certified environmental management system (ISO 14001). This process ensures that energy consumption and the use of primary raw materials are kept to a minimum, thus reducing waste production.
Contents Contents Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Basic operating instructions . . . . . . . . . . . . . . . . . . . .8 optiPoint 500 entry control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Making Calls – Convenience Functions . . . . . . . . . 18 Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accepting a Specific Call for Your Colleague . . . . . . . . . . . . . . . . . . Rejecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Answering Calls from the Entrance Telephone and Opening the Door . . . .
Contents Trace Call: Identifying Anonymous Callers (Not for U.S.) . . . . . . . . . . . Locking the Telephone to Prevent Unauthorized Use . . . . . . . . . . . . . . Locking Another Telephone to Prevent Unauthorized Use . . . . . . . . . . Saving Your PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 36 37 37 Using Other Functions/Services . . . . . . . . . . . . . . . .38 Sending a Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Special Functions in the LAN (Not for HiPath 500) . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Leaving a Hunt Group/Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transferring Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Night Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Activating and Deactivating a Ringing Group. . . . . . . . . . . . . . . . . . . . . Controlling Relays . . . . .
Basic operating instructions Basic operating instructions optiPoint 500 entry control panel Speaker for ring tones Keys for telephone settings Handset LEDs Eight fixed function keys: Consultation Redial Message Waiting Callback Speed Dial Mute Speaker Release Keypad Your service personnel can customize the default assignment to meet your preferences and requirements following order placement.
Basic operating instructions Step by Step How to Use these Operating Instructions You will find a graphic representation of the steps in logical sequence in the left column. Below is an explanation of the symbols: n Lift the handset (off-hook). t Replace the handset (on-hook). s Conduct a call. o Enter a telephone number or code. dd Enter the PIN. u or v Press volume controls on the telephone. w You hear a tone.
Basic operating instructions Step by Step Accessing Functions ... With Codes You can activate the functions of your system by entering codes such as: qmk DND (do not disturb) on. rmk DND (do not disturb) off. All codes to activate or enable functions are always introduced by pressing the star key, and all codes to deactivate, disable or delete functions are always entered starting with the pound key.
Making Calls – Basic Functions Step by Step Making Calls – Basic Functions Making and Answering Calls Special default ring signaling is set for your telephone: • • • • When you receive an internal call, your telephone rings once every four seconds (single-tone sequence). When you receive an external call, your telephone rings twice in rapid succession every four seconds (dual-tone sequence).
Making Calls – Basic Functions Step by Step Dialing Numbers/Making Calls Answering a Call With the Handset n Lift the handset. o Internal calls: Enter the station number. External calls: Enter the external code and the station number. The called party does not answer or is busy: t Replace the handset. or Press the key. Release On-Hook Dialing o Internal calls: Enter the station number. External calls: Enter the external code and the station number.
Making Calls – Basic Functions Step by Step Redialing a Number The last three external telephone numbers dialed are stored automatically. You can redial them simply by pressing a key. n Lift the handset. Redial Press this key. If this feature is configured (contact the service personnel), accounts codes entered are also saved Æ Page 33.
Making Calls – Basic Functions Step by Step Switching to the Party on Hold (Toggle) qf Press the key. Enter the code. LED continues to flash. Consultation Combining the calling parties into a three-party conference qg Press the key. Enter the code. The LED goes out. Consultation Connecting the other parties to each other t Replace the handset. Transferring a Call If the person you are speaking to wants to talk to another colleague of yours, you can transfer the call that colleague.
Making Calls – Basic Functions Step by Step Deactivating call forwarding: n Lift the handset. re w Enter the code. When call forwarding is active, a special dial tone sounds when you lift the handset. If DID DTMF is active (contact the service personnel), you can also forward calls to this destination. Destinations: fax = 870, DID = 871, fax DID = 872. Call Forwarding in the Carrier Network and Forwarding Multiple Subscriber Numbers (MSN) (Not for U.S.
Making Calls – Basic Functions Step by Step Using Callback If a user is busy or is not answering, you can store an automatic callback. This feature saves you from having to make repeated attempts to reach the user. You receive a callback, • When the other party is no longer busy • When the user who did not answer has conducted another call. Storing a Callback Precondition: You have reached a busy line or noone answers. Press the key. The LED lights up. Callback or Press the key. LED flashes.
Making Calls – Basic Functions Step by Step Telephone Settings Adjusting the Ring Volume u or v Press one of these keys while the phone is idle. e Press the key. u or v To raise or lower the volume, keep pressing the keys until the desired volume is set. u v simultaneously Save. Adjusting the Ring Tone u or v Press one of these keys while the phone is idle. f Press the key. u or v To adjust the ring tone, keep pressing the keys until the desired ring tone is set. u v simultaneously Save.
Making Calls – Convenience Functions Step by Step Making Calls – Convenience Functions Making Calls Accepting a Specific Call for Your Colleague You hear another telephone ring. n Lift the handset. qim Enter the code. o Enter the number of the telephone that is ringing. Accepting calls in a team Æ Page 48. Rejecting Calls You can reject calls which you do not wish to take. The call is then signaled at another definable telephone (contact the service personnel). The telephone rings.
Making Calls – Convenience Functions Step by Step Answering Calls from the Entrance Telephone and Opening the Door If an entrance telephone has been programmed, you can use your telephone to speak to someone at the entrance telephone and to activate a door opener. If you are authorized to activate a door opener (contact the service personnel), visitors can open the door themselves by entering a 5-digit code (e.g. using a DTMF transmitter or installed keypad).
Making Calls – Convenience Functions Step by Step Activating the door opener: n Lift the handset. qlm Enter the code. o Dial the entrance telephone number. o w Enter the five-digit code. Default code = "00000" (contact the service personnel). e or f Enter the type of door opener. 1 = enable with ring, 2 = enable w/o ring = You can also open the door without a doorbell ring. Deactivating the door opener: n Lift the handset. rlm Enter the code. o w Dial the entrance telephone number.
Making Calls – Convenience Functions Step by Step Dialing Numbers/Making Calls Speed-Dial Using Station and System Speed-Dial Numbers Precondition: You have stored station speed-dial numbers Æ Page 21 or the service personnel has stored system speed-dial numbers. n Lift the handset. Press the key. Speed-dial or qk Enter the code. o Enter a speed-dial number. "*0" to "*9" = station speed-dialing. "000" to "999" = system speed-dialing (contact the service personnel).
Making Calls – Convenience Functions Step by Step Using Mailboxes If there are messages waiting for you, you will hear a special dial tone (continuous buzzing) when you lift the handset. n w Lift the handset. rjlg Enter the code. or Message Waiting Press the illuminated key. This connects you to the sender of the message or the mailbox system.
Making Calls – Convenience Functions Step by Step Reserve Trunk If this feature is configured (contact the service personnel), you can reserve a busy trunk for your own use. When the trunk is free, you receive a call. n Lift the handset. o Enter the external code. The external trunk is busy; you hear a busy signal tone. Wait about 5 seconds until the busy tone ends. The trunk is reserved. t Replace the handset. When the reserved trunk becomes free: Your telephone rings. n Lift the handset.
Making Calls – Convenience Functions Step by Step Assigning a Station Number (Not for U.S.) If this function has been configured (contact the service personnel), you can selectively assign a specific number (DID number) to your telephone before making an external call. The assigned number then appears on the called party’s display. n Lift the handset. qhe Enter the code. o Enter the DID number you wish to use. o Dial the external number.
Making Calls – Convenience Functions Step by Step During a Call Using Call Waiting Callers can still reach you while you are engaged in another call. A signal alerts you to the waiting call. You can either ignore or accept the waiting call. When you accept the waiting call, you can either end the first call or place it on hold and resume the call later on. You can also bar call waiting or the call waiting tone Æ Page 26.
Making Calls – Convenience Functions Step by Step Preventing and Allowing Call Waiting (Automatic Camp-On) If this function has been configured (ask the service personnel), you can prevent or allow a second call Æ Page 25 from being signaled by automatic camp-on during an ongoing call. n Lift the handset. rhmd Enter the code to "prevent" or "allow" call waiting. or qhmd w Turning the Call Waiting Tone On and Off You can suppress the call waiting tone every six seconds for external calls.
Making Calls – Convenience Functions Step by Step Retrieving a Parked Call Precondition: One or more calls have been parked. The telephone is idle. n Lift the handset. rij Enter the code. d ... m Enter the park slot number you noted earlier. If the park slot number you enter is not in use, you cannot retrieve the call. If a parked call is not picked up, after a specific period of time the call is returned to the telephone from where it was parked (recall).
Making Calls – Convenience Functions Step by Step If the second party does not answer: Consultation Consultation Press this key and wait two seconds. or (depending on the configuration) Press the key twice. Adding Up to Five to the Conference (Initiator Only) Consultation Press the key. LED flashes. o Call the new party. Announce the conference. qg Press the key. Enter the code. The LED goes out, Consultation etc. Leaving a Conference t Replace the handset.
Making Calls – Convenience Functions Step by Step After a Speaker Call (Announcement) in a Group If this function has been configured (contact the service personnel), you can use a speaker call (announcement, Æ Page 22) to announce a call in progress to a group of users Æ Page 47. After a member of the group has accepted the call request, you can transfer the waiting party. Precondition: You are conducting a call. Press the key. LED flashes. Enter the code.
Making Calls – Convenience Functions Step by Step If You Cannot Reach a Destination Call Waiting (Camp-On) It is important that you reach the called party, but the number is busy. n Lift the handset. o Enter the internal station number. Wait (approx. 5 seconds) until the busy tone is followed by the ring tone. The called party can then respond Æ Page 25. The called party can prevent automatic call waiting Æ Page 26.
Making Calls – Convenience Functions Step by Step Using Night Answer When night answer mode is active, for example during a lunch break or after office hours, all external calls are immediately forwarded to a specific internal telephone (night station). The night station can be defined by the service personnel ( standard night answer service) or by you (temporary night answer service).
Saving Function, Procedures and Appointment Step by Step Saving Function, Procedures and Appointment Appointments Function Saving Appointments You can tell your telephone to give you a call when you want to be reminded of an appointment Æ Page 32. To do this, you need to save the time you want the call to be made. The appointment can be set for any time within the next 24 hours. n Lift the handset. qhj Enter the code. o Enter a 4-digit time, such as 0905 for 9:05 (= 9.05 a.m.) or 1430 for 14.30 (= 2.
Displaying and Assigning Call Charges Step by Step Displaying and Assigning Call Charges Dialing with Call Charge Assignment You can assign external calls to certain projects. Precondition: The service personnel has set up account codes for you. n Lift the handset. qjd Enter the code. o Enter the account code. If applicable r w Press this key (may be needed, depending on the configuration; contact the service personnel). o Enter the number of the external station.
Private Sphere/Security Step by Step Private Sphere/Security Turning Do Not Disturb On and Off You can activate the do not disturb function if you do not want the receive any calls. When do not disturb is activated, internal callers hear a busy signal and external callers are rerouted to a telephone assigned for this purpose (contact the service personnel). n Lift the handset. qmk or rmk w Enter the code for "on" or "off".
Private Sphere/Security Step by Step Silent Monitor If this function has been configured (contact the service personnel), you can join a call already in progress at an internal station and listen in unnoticed. n Lift the handset. qmhh Enter the code. o Enter the internal station number. Monitoring a Room A telephone can be used to monitor a room. The function must be activated on the telephone that you want to monitor. Calling this telephone lets you hear what is going on in the room.
Private Sphere/Security Step by Step Trace Call: Identifying Anonymous Callers (Not for U.S.) You can have the carrier identify malicious external callers. You can save the caller’s station number during the call or for 30 seconds after the call ends. However, it is essential that you do not replace your handset during this time. s You are engaged in an external call. Press the key. LED flashes. Enter the code.
Private Sphere/Security Step by Step Locking Another Telephone to Prevent Unauthorized Use If this function has been configured (contact the service personnel), you can lock other telephones to prevent unauthorized use, and later unlock them again. You can use this function to unlock the telephone for users who have locked their telephones and then forgotten their PINs. n Lift the handset. qmhg Enter the code. o Enter the internal number of the telephone that you want to lock or unlock.
Using Other Functions/Services Step by Step Using Other Functions/Services Sending a Message You can send short text messages (infotexts) to single users or groups of users who have system telephones. On system telephones with no display (e.g. optiPoint 500 entry), on ISDN, pulse or tone dialing telephones, transmitted text messages will be saved as a callback request. n Lift the handset. qjl Enter the code. o Enter the internal station number of the recipient or group. d ...
Using Other Functions/Services Step by Step Answering Messages If you have received any messages, the button "messages/info" will light up. After lifting the receiver you will hear a special dial tone or an announcement. n w Lift the handset. rjlg Enter the code. or Message Waiting Press the illuminated key. This connects you to the sender of the message or the mailbox system.
Using Other Functions/Services Step by Step Change call number (relocate) You can put your call number on every other available telephone when it is set up (contact the service personnel). Your previous telephone then receives the old call number of your new telephone. The call number together with the settings (e.g. programmed keys) of the telephone are changed. Precondition: Your old and new telephone are the first telephones at each connection. The telephone are in idle state.
Using Other Functions/Services Step by Step Resetting Services and Functions (System-Wide Cancellation for a Telephone) There is a general reset procedure for activated functions. The following functions are canceled, if they were activated: • • • • • • • • • • Forwarding on Advisory msg. on Ringing group on Hunting group off Suppress call ID Waiting tone off DND on Ringer cutoff on Messages received: View callbacks n Lift the handset. rd w Enter the code.
Using Other Functions/Services Step by Step Activating Functions for Another Telephone If this function has been configured (contact the service personnel), you can turn the following functions on and off for other telephones. This feature is also known as associated service.
Using Other Functions/Services Step by Step • • • • • • • • • • • • Lock and unlock all phones, code: *66/#66 Æ Page 36 Save PIN, code: *93 Æ Page 37 Send a message, code: *68/#68 Æ Page 38 Group ringing, code: *81/#81 Æ Page 48 Group call, code: *85/#85 Æ Page 47 Suppress caller ID, code: *86/#86 Æ Page 34 Open door, code: *61 Æ Page 19 Door opener on/off, code: *89/#89 Æ Page 20 Control relay, code *90/#90 Æ Page 45 Do not disturb, code: *97/#97 Æ Page 34 Speed-dialing, code: *7 Æ Page 21 Associated ser
Using Other Functions/Services Step by Step Controlling Connected Computers or Other Programs and Telephone Data Service (Not for HiPath 500) If this function has been configured (contact the service personnel), you can control connected computers or programs running on them, such as hotel services or information systems, from your telephone. Precondition: You have set up a connection. Press the key. LED flashes. Enter the code.
Using Other Functions/Services Step by Step Controlling Relays (Not for HiPath 500) If this feature is configured (contact the service personnel), you can turn up to four relays on and off to control different facilities (such as a door opener). Depending on how they are programmed, you can switch the relays on and off or switch them on and have them switched off automatically after a timeout.
Using Other Functions/Services Step by Step Answering the page from the nearest telephone: n Lift the handset. qim Enter the code. o Enter your own station number. Enhanced Paging Equipment (HiPath 3700/ 3750/3800 Only) Paging: n Lift the handset. qhi Enter the code. o w Enter the number of the party you want to page. Answering the page from the nearest telephone: n Lift the handset. rhi Enter the code. o Enter your own station number.
Using Team Functions Step by Step Using Team Functions Turning Group Call On and Off If this function has been configured (contact the service personnel), you belong to one or more groups of users who can each be reached under a hunt group or group call number. Incoming calls are signaled on all group member telephones in the order in which they are received ( hunt group) or simultaneously (= group call) until one member of the group accepts the call.
Using Team Functions Step by Step If you deactivate the audible tone for another group or trunk, or deactivate it for all groups and trunks to which you belong, a special dial tone sounds when you lift the handset. Accepting a Call for Another Member of Your Team You can accept calls for other telephones in your team (group) from your telephone even while engaged in another call. To do this, contact your service personnel to find out if a group has been configured.
Using Team Functions Step by Step Uniform Call Distribution (UCD) If this function has been configured (contact the service personnel), you belong to a group of users (agents) to whom calls are distributed. An incoming call is always assigned to the agent who has had the longest break without a call. Logging on and off at the beginning and end of your shift: n Lift the handset. qhde or rhde Enter the code for "Log on" or "Log off". o w To log on, enter your identification number ("Agent:").
Team and Executive/Secretary Functions With Assigned Trunk Lines Step by Step Team and Executive/Secretary Functions With Assigned Trunk Lines If this function has been configured (contact the service personnel), you belong to a team of users for whom special trunk lines exist. You can then conduct your calls as usual via the trunk assigned to you. In addition, you can also activate call forwarding or a ring transfer for the lines of your group.
Testing the Telephone Step by Step Transferring Calls Directly to the Executive (Only in an Executive/Secretary Group) Normally, audible signaling of all calls for the executive is heard only in the secretary’s office. You can activate audible signaling so that calls are only signaled on the executive telephone and on a second telephone assigned to it. Activating this function: n Lift the handset. qidf Enter the code. o w Enter the desired line number. Deactivating this function: n Lift the handset.
Special Functions in the LAN (Not for HiPath 500) Step by Step Special Functions in the LAN (Not for HiPath 500) If your telephone is operating in a HiPath 5000 RSM environment, multiple HiPath 3000 systems are interconnected via a LAN (Local Area Network, e.g. proprietary PC network). Your telephone calls are conducted via the LAN (PC network). If this is the case, you must take certain special features into consideration when performing various functions. These are described below.
Special Functions in the LAN (Not for HiPath 500) Step by Step Transferring Call Forwarding You can activate/deactivate call forwarding Æ Page 14 for your telephones from other HiPath 5000 RSM telephones. n Lift the handset. qhk Enter the code. o Enter the (DISA) call number of the HiPath 3000 to which your telephone is connected. r Enter. o Enter the (DISA) call number of your telephone. r Enter. Activating this function: qe Enter the code.
Special Functions in the LAN (Not for HiPath 500) Step by Step Using Night Answer If authorized (contact the service personnel), you can define telephones in other HiPath 3000 communications platforms as the night answer Æ Page 31. n Lift the handset. qhk Enter the code. o Enter the (DISA) call number of the HiPath 3000 to which the night answer telephone is connected. r Enter. o Enter the (DISA) call number of the telephone from which you wish to activate/deactivate the night answer service. r Enter.
Special Functions in the LAN (Not for HiPath 500) Step by Step Activating and Deactivating a Ringing Group You can have calls for your telephone signaled audibly at external telephones or at telephones in other HiPath 3000 communications platforms Æ Page 48. Saving the telephones for the ringing group: n Lift the handset. qle Enter the code. o Enter the call number. r w Enter. Removing all telephones in call ringing group: n Lift the handset. rle w Enter the code.
Special Functions in the LAN (Not for HiPath 500) Step by Step Controlling Relays If this feature is configured (contact the service personnel, you can also control relays Æ Page 45 in other HiPath 3000 communications platforms. n Lift the handset. qhk Enter the code. o Enter the (DISA) call number of the HiPath 3000 in which the relay is to be controlled. r Enter. o Enter the (DISA) call number of the telephone from which you wish to control the relay. r Enter.
Special Functions in the LAN (Not for HiPath 500) Step by Step Opening the Door If this feature is configured (contact the service personnel), you can also activate the door opener Æ Page 19 in other HiPath 3000 communications platforms. n Lift the handset. qhk Enter the code. o Enter the (DISA) call number of the HiPath 3000 in which the door is to be opened. r Enter. o Enter the (DISA) call number of the telephone from which you wish to activate the door opener. r Enter. qje Enter the code.
Documentation Documentation You can find these operating instructions in the Internet in PDF format under http://www.siemens.com/hipath and on CD-ROM (ask the service personnel) in HTML and PDF format. In order to look at and print the operating instructions in PDF format, you need a computer on which the free Acrobat Reader software package is installed by Adobe. To look at the operating instructions in HTML format you need a computer with a www browser, e.g. Microsoft Internet Explorer.
Fixing Problems Fixing Problems Telephone Maintenance • • • Always use a damp or antistatic cloth to clean the telephone. Never use a dry cloth. If the telephone is very dirty, clean it with a diluted neutral cleaner containing surfactants, such as a dish detergent. Afterwards remove all traces of the cleaner with a damp cloth (using water only). Never use cleaners containing alcohol, cleaners that corrode plastic, or abrasive powders.
Index Index A account code .............................................. 33 agents .......................................................... 49 announcement ........................................... 22 answering a timed reminder .................... 32 appointment ................................................ 32 assigning a DID number ........................... 24 associated dialing/dialing aid .................... 24 automatic connection setup ..................... 22 C call accepting, group ....
Index H N handsfree answerback .............................. 18 HiPath 5000 actuators .................................................. 56 group call ................................................. 52 hunt group ............................................... 52 night answer ........................................... 54 opening the door .................................... 57 relays ........................................................ 56 ringing group ...........................................
Index setting your telephone ........................ 17, 34 silent monitor .............................................. 35 simple paging equipment ......................... 45 speaker call ................................................. 22 special dial tone .......................................... 22 speed-dialing dialing numbers ...................................... 21 saving station speed-dialing ................. 21 suffix-dialing ............................................ 21 system ...........
Overview of Functions and Codes (Alphabetical) Overview of Functions and Codes (Alphabetical) The table below lists all available functions. If these functions have been configured (contact the service personnel), they can be called by entering a code or pressing a function key. Functions Accept call Operating Steps Directed n qim o Int. Group n qik Adjust ring tone u or v f u v simultaneously Adjust ring volume u or v e u v simultaneously Answer call n Assign station number (not for U.S.
Overview of Functions and Codes (Alphabetical) Functions Operating Steps Call waiting (camp-on) n o Int.
Overview of Functions and Codes (Alphabetical) Functions Conference Operating Steps Start n o Stn No. o Stn No. The other party does not respond 1. Continue the call Add a party to the conference (max. five) Leave conference Door opener Consultation Consultation o Stn No. Consultation qg etc. t Consultation rg Remove ISDN central office party from the conference (only for U.S.
Overview of Functions and Codes (Alphabetical) Functions Operating Steps DTMF dialing/Tone dialing s Ending a call t or Group call Leave Consultation qig o Release n rli w or n rlir w or n rli o Group w Join n qli w or n qlir w or n qli o Group w HF answerback n Hotline n Making calls n o Stn No. or o Stn No. n Message Send n qjl o Int. d...m w Delete (sent) n rjle w Answering n w rjlg n qmhh o Int. Monitoring Mute Night answer Off s Mute On s Mute On n qhh o Int.
Overview of Functions and Codes (Alphabetical) Functions Operating Steps Park a call s Consultation d...m w t Phone qij Retrieve a parked call n rij d...m Changeover on (lock) n qjj o Code Changeover off (unlock) n rjj o Code Lock all phones n qmhg o Int. q Unlock all phones n qmhg o Int. r Phone test n qmhd Picking up (retrieving) a held call n qjg o Line No.
Overview of Functions and Codes (Alphabetical) Functions Suppress caller ID Operating Steps On n qlj w Off n rlj w Telephone data service (not for HiPath 500) s Timed reminder Save n qhj o (Time e.g.0905) w Consultation Delete n rhj w Accept timed call nt qhf o Trace call (not for U.S.) s Consultation qlh Transferring a call s Consultation o Stn No. t s Consultation qld ...
FCC and Industry Canada Compliance FCC and Industry Canada Compliance This section describes the requirements for compliance with Federal Communications Commission (FCC) Rules and Industry Canada CS-03 standard. FCC Certification and Requirements The following paragraphs describe requirements and information based on FCC rules. Service If you experience problem with the Siemens optiPoint telephone, contact Siemens customer support at 1-800-835-7656 for information on service and repairs.
FCC and Industry Canada Compliance If at any time the ownership of Siemens optiPoint telephone is transferred to someone else (whether independently or as part of a system), please supply this manual to the new owner. 1. REN The ringer equivalence number (REN) is used to determine the quality of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call.
FCC and Industry Canada Compliance Equipment Attachment Limitations The following are notices required by Industry Canada Terminal Attachment Program Certification Procedure CP-01, Part I, Section 14. Ringer Equivalence Number (REN) The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
www.siemens.com/hipath The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. The trademarks used are owned by Siemens AG or their respective owners.
