Technical data

Alphabetical Reference Description of functions
80
Subscriber Number
• Enter the subscriber number for the optiPoint 410 here.
• The number can be 1 to 24 characters long.
• This number is used as the internal telephone number.
• Number editor in optiPoint 410 Æ page 94.
Æ page 27 Æ page 56
Subscriber Password
• Further description ...
• Password editor Æ page 92.
Æ page 27 Æ page 56
System Type
• Select the type of the used communication platform here.
Æ page 26 Æ page 54
Terminal IP Address
• Enter the Æ IP address for the optiPoint 410 here, provided no
Æ DHCP server assigns this value dynamically (Æ DHCP IP Assign-
ment).
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Standard value Æ page 95.
• IP editor in optiPoint 410 Æ page 94.
Æ page 20 Æ page 16 Æ page 58
Te r m i n a l M a s k
• Enter the Æ Subnet Mask for the optiPoint 410 here, provided that no
Æ DHCP server assigns this value dynamically (Æ DHCP IP Assign-
ment).
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Standard value Æ page 95.
• IP editor in optiPoint 410 Æ page 94.
Æ page 20 Æ page 16 Æ page 58
Time
• The manual definition is necessary only if this information is not trans-
mitted automatically (e.g., by the Æ PBX or by a Æ DHCP server).
• Define the time format here and enter the current time.
• Date/Time editor in optiPoint 410 Æ page 94.
Æ page 38 Æ page 54