Technical data

Alphabetical Reference Description of functions
68
Configuration Filename
• Specify the name of the file containing the configuration data of the
optiPoint 410 enthält.
• The file must exist in a defined directory on the Æ FTP server
(Æ Download Server Address, Æ FTP Path).
• Valid values: 1 ... 24 characters and corresponding to the DOS conven-
tions (8.3).
• Standard name Æ page 95.
• Text editor in the optiPoint 410 Æ page 93.
Æ page 58
Date
• Manual definition is necessary only if this information is not transmitted
automatically (e.g., by the Æ PBX or by a Æ DHCP server).
• Define the date format here and enter the current date.
• Date/Time editor in the optiPoint 410 Æ page 94.
Æ page 38 Æ page 60
Date Format
• Manual definition is necessary only if this information is not transmitted
automatically (e.g., by the Æ PBX or by a Æ DHCP server).
• Define the date format here.
Æ page 37 Æ page 60
Daylight Saving
• Manual definition is necessary only if this information is not transmitted
automatically (e.g., by the Æ PBX or by a Æ DHCP server).
• Activate this switch if a time shift should be considered in relation to
the summer period.
Æ page 37 Æ page 60
Default Route
• Enter the Æ IP address that was assigned to your Æ PBX if no
Æ DHCP server assigns this value dynamically (Æ DHCP IP Assign-
ment).
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Standard value Æ page 95.
• IP editor in the optiPoint 410 Æ page 94.
Æ page 68 Æ page 16 Æ page 58