User guide
Table Of Contents
- Important information
- General information
- Getting to know your OpenStage phone
- Basic functions
- Secure voice transmission
- Answering a call
- Directed pickup
- Switching from handset to speakerphone mode
- Switching from speakerphone mode to the handset
- Switching from headset to speakerphone mode
- Open listening
- Activating/deactivating the microphone
- Ending a call
- Group call
- Making calls
- Redial
- Consulting a second party
- Call forwarding
- Callback
- Calling back missed calls
- Programming sensor keys
- Enhanced phone functions
- Making calls with multiple lines
- Privacy/security
- Mobility
- OpenScape Voice functions
- Individual phone configuration
- Web interface (WBM)
- Fixing problems
- Index
Enhanced phone functions
79
Step by Step
or Connect by hanging up
Prerequisite: Connecting by hanging up is activated
(ask your service personnel) and "Toggle associate"
must be set to "Yes" (Æ page 80). Before you can be
connected by hanging up you must have toggled at
least twice (Æ page 52).
] or n Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call waiting
Prerequisite: The option was programmed by your ad-
ministrator.
z
You can also configure this setting via the Web interface
Æ page 162.
N Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
When Allow call waiting is activated, you can toggle
the configured sensor key to switch call waiting on/off
(Æ page 68).
If the Call waiting (second call) function is deacti-
vated, a caller hears the busy signal if you are al-
ready conducting a call.
User
Configuration
Incoming calls
Handling
Allow call waiting
Yes
Save & Exit