User guide
Table Of Contents
- Important information
- General information
- Getting to know your OpenStage phone
- Basic functions
- Secure voice transmission
- Answering a call
- Directed pickup
- Switching from handset to speakerphone mode
- Switching from speakerphone mode to the handset
- Switching from headset to speakerphone mode
- Open listening
- Activating/deactivating the microphone
- Ending a call
- Group call
- Making calls
- Redial
- Consulting a second party
- Call forwarding
- Callback
- Calling back missed calls
- Programming sensor keys
- Enhanced phone functions
- Making calls with multiple lines
- Privacy/security
- Mobility
- OpenScape Voice functions
- Individual phone configuration
- Web interface (WBM)
- Fixing problems
- Index

Important information
3
Location of the telephone
• The telephone should be operated in a controlled environment with an
ambient temperature between 5°C and 40°C.
• To ensure good speakerphone quality, the area in front of the micro-
phone (front right) should be kept clear. The optimum speakerphone
distance is 50 cm.
• Do not install the telephone in a room where large quantities of dust
accumulate; this can considerably reduce the service life of the tele-
phone.
• Do not expose the telephone to direct sunlight or any other source of
heat, as this is liable to damage the electronic components and the
plastic casing.
• Do not operate the telephone in damp environments such as bath-
rooms.
Product support on the Internet
Information and support for our products can be found on the Internet:
http://www.siemens-enterprise.com/
.
Technical notes, current information about firmware updates, frequently
asked questions and lots more can be found on the Internet at:
http://wiki.siemens-enterprise.com/.










