User guide
Table Of Contents
- Important information
- General information
- Getting to know your OpenStage phone
- Basic functions
- Secure voice transmission
- Answering a call
- Directed pickup
- Switching from handset to speakerphone mode
- Switching from speakerphone mode to the handset
- Switching from headset to speakerphone mode
- Open listening
- Activating/deactivating the microphone
- Ending a call
- Group call
- Making calls
- Redial
- Consulting a second party
- Call forwarding
- Callback
- Calling back missed calls
- Programming sensor keys
- Enhanced phone functions
- Making calls with multiple lines
- Privacy/security
- Mobility
- OpenScape Voice functions
- Individual phone configuration
- Web interface (WBM)
- Fixing problems
- Index
Making calls with multiple lines
103
Step by Step
Direct station selection keys
Apart from line keys, administrator can also configure
direct station selection (DSS) keys. You can use a DSS
key to call an internal station directly, pick up calls for
this station or forward calls directly to it.
Calling a station directly
You cannot use DSS if the user is on another call (flash-
ing LED).
Calling from the idle menu
S Press the relevant DSS key.
or
h Press the key shown to open the Overview tab
Æ page 29.
Select and confirm the DSS line. The key lights up and
a connection is established.
Consultation with the DSS station
Prerequisite: You are conducting a call and administra-
tor have configured the DSS key for consultation.
S Press the relevant DSS key for the consultation. The key
lights up and a connection is established. If the called
party answers, you can toggle, transfer the first call or
initiate a conference.
DSS call 1
The administrator can configure the DSS key so
that the connection is also established when the
DSS station has activated do-not-disturb or call
forwarding.
If administrator have configured transfer instead
of consultation, you can only transfer the current
call to the DSS station.