User's Manual

Making calls with multiple lines
95
Step by step
Making calls with multiple lines
You can use your OpenStage 40 as a multi-line phone.
If you have any questions regarding how to configure
your OpenStage phone as a multi-line phone, please
contact your administrator.
The following is a description of the telephony scenari-
os for multi-line phones. To facilitate comprehension,
you should familiarize yourself with the enhanced tele-
phony application and how to use the line keys before-
hand. Furthermore, you can specify individual settings
for your multi-line telephone. Refer to the following sec-
tions for a detailed description of the individual compo-
nents:
• Introduction to multi-line phones  page 13
• Lines and line keys  page 23
• Multi-line telephony interface  page 31
• Individual settings  page 110
Incoming calls
Depending on your individual settings, you will be noti-
fied of incoming calls  page 159.
Accepting calls for the primary line
In this case, the telephone behaves in the same way as
a single-line telephone. See  page 14 and  page 58.
Accepting calls for secondary lines
Prerequisite: The secondary line is configured on your
multi-line telephone.
Using the handset
^ Lift the handset.
[ Conduct call.
The line used for the ringtone is selected auto-
matically. If there are calls on several lines, you
are connected with the line that has been ringing
the longest.