User's Manual

Step by step

Making calls with multiple lines

102

Direct station selection keys

Apart from line keys, administrator can also configure

direct station selection (DSS) keys. You can use a DSS

key to call an internal station directly, pick up calls for

this station or forward calls directly to it.

Calling a station directly

You cannot use DSS if the user is on another call (flash-

ing LED).

Calling from the idle menu

S Press the relevant DSS key.

h Press the key shown to open the Overview tab

 page 31.

Select and confirm the DSS line. The key lights up and

a connection is established.

Consultation with the DSS station

Prerequisite: You are conducting a call and administra-

tor has configured the DSS key for consultation.

S Press the relevant DSS key for the consultation. The key

lights up and a connection is established. If the station

answers, you can toggle, transfer the first call or initiate

a conference.

DSS call 1

administrator can configure the DSS key so that

the connection is also established when the DSS

station has activated do-not-disturb or call for-

warding.

If administrator has configured transfer instead

of consultation, you can only transfer the current

call to the DSS station.