User guide

Privacy/security

Step by Step

Turning ringer cutoff on and off

If you do not wish to take calls, you can activate the ring-

er cutoff function. Calls are only identified by one ring

signal, an indication on the display, and a key which has

been programmed to flash (such as a trunk key).

Activating

c Open the idle menu Æ page 25.

Select and confirm the option shown

[1]

Deactivating

c Open the idle menu Æ page 25.

Confirm.

Activating/deactivating "Do not disturb"

If you do not wish to take calls, you can activate do not

disturb. Internal callers hear the busy tone, external call-

ers are connected to another phone, which you can

specify (contact your service personnel).

Activating

c Open the idle menu Æ page 25.

Select and confirm the option shown.

Activating

c Open the idle menu Æ page 25.

Confirm.

Ringer cutoff on

[1] "Differing display view in a HiPath 4000 environment" Æ page 134

Ringer cutoff off

DND on

DND off

When you lift the handset, you will hear a special

tone (continuous buzzing) reminding you that "Do

not disturb" is activated.

Authorized internal callers automatically override

the DND feature after five seconds.