User guide

Getting to know your OpenStage phone

Program/Service menu

You can make local settings here.

Press the N key and confirm the User menu. If configured, enter and

confirm your personal user password.

You can use the navigation keys to navigate through the menus as de-

scribed on ! page 18. Once the admin password has been entered, the

Admin menu is available to the relevant service personnel.

User settings

In the User menu (see ! page 185), settings options are provided that al-

low you to adapt the telephone to your individual requirements.

Select a menu using the navigation keys:

• "Date and time" ! page 150

•"Audio" ! page 154

• "Configuration" e.g. ! page 122 or ! page 75

• "Phone" ! page 149

• "Locality" ! page 154

• "Security" ! page 123 or ! page 126

• "Network information" ! page 163

• "Diagnostic information" ! page 176

• "Reset" ! page 164

If you are in one of these menus or submenus, depending on the situation,

you have the following options to leave the menus:

• Save & exit (If you have made a setting and want to keep it)

• Exit (no save) (If you have made a setting which you do not want to

use after all or if you do not want set any of the options)

• Back (If you want to leave the main menu or submenu)

• Press and hold the : key to access the option to leave the current

menu level.

• You exit the menu by pressing the N key and return to idle mode

! page 24.