User guide

Step by step
Mobility
132
Logging on with forced, delayed logoff at a
remote- phone
If the remote phone is busy and your service personnel
enabled "Forced logoff during call" with a set timeout,
forced logoff does not occur until this timeout expires.
Logon via a key
If a program key is configured for Mobility.
S Press the "Mobility" program key.
or Logon via the context menu
Select and confirm the option shown in the idle display
context menu ! page 24.
You are prompted to enter your mobility ID.
j Enter and confirm Mobility ID, usually a telephone num-
ber.
You are prompted to enter the password.
j Enter and confirm the user password.
The following mobility messages appear in the display:
• Validating
• Logging off elsewhere
• Registering
• Downloading user data
Once logon is complete, the "Mobility" program key
LED lights up and the mobility icon appears in the dis-
play .
Mobile logon
Mobility ID
Enter password
At the same time, the display on the busy re-
mote phone shows "Forced logoff pending".After
the set timeout the active call is ended and re-
mote logoff is performed.