Home Security System User Manual

BHB_DATAIMPORT_07.fm
07/2010
DAKS OScAR-Pro-TT Dataimport-Tool, User Manual 7-27
For internal use only Description of INI files
Table fields
7.5.8 Coding of iDispProps
This section describes in detail the bit-by-bit coding of the iDispProps data field found in the
tables "Broadcasts", "Conferences" and "Call Profiles".
● Bits 2..0: Text displayed to initiator:
– 000 = general text (application-specific)
– 001 = group-specific text (name of group); n/a in abbreviated address call/speed calling
● Bits 5..3: Number displayed to members after sending of the ‘Incoming tie trunk code‘:
– 000 = no further digits
– 001 = received suffix digits
– 010 = received suffix digits without selection of applications or functions
● Bits 8..6: Text displayed to other members after sending of the ‘Incoming or outgoing tie
trunk code’
– 000 = general text (application-specific)
– 001 = group-specific text (name of group); n/a for abbreviated address call/speed calling
– 010 = for activation via telephone always the ‘Calling Name’ received with:
> prepended „A:“, „C:“, „P:“, „Q:“ for alarms, conf., PCS, abbreviated address call/speed dial
> prepended input description when input is activated
> abbreviated subscriber text for PC activation
– 011 = ditto, but in alarms, conf., PCS, and abbreviated address call/speed dial without prepended
„A:“, „C:“, „P:“, „Q:“.
● Bits 11..9: Number displayed to other members after sending of the ‘Incoming or outgoing
tie trunk code’
– 000 = none
– 001 = identifier of the group (for conferences: ID of initiator; for Call Profiles: ID to activate)
– 010 = cost center of the initiator, PC user or contact (if default cost center unknown)
– 011 = for activation via contact or PC: the cost center of the contact or PC user (if default cost center
is unknown); for activation via telephone: the received ‘Calling Number’ of the initiator.
– 100 = same as 011, but for all outgoing connections the cost center of the called subscriber (if de-
fault cost center unknown)
– 101 = same as 011, but for all outgoing external connections the cost center of the called subscriber
(if default cost center unknown)