Home Security System User Manual

Description of INI files For internal use only
07/2010
7-24 DAKS OScAR-Pro-TT Dataimport-Tool, User Manual
BHB_DATAIMPORT_07.fm
Table fields
Bit 15: Active number signifies characters appended to ID
+ Bit 4 may not be set.
+ Bits 6 and 7 may only be set in combination with
bits 0 and 1.
Other Call Profile pa-
rameters
iExProperties - 0 Bitmask of the other Call Profile parameters:
Bit 00: assignment of most recent announcements before the
dial-up
Bit 01: <reserved>
Bit 02: Confirmation callback after setting the active number.
Display parameters iDispProps see Section
7.5.8, „Coding
of iDispProps“
0 Bit mask of the display texts, display numbers, and DTMF message
Call acceptance code sPickUpCode 4 characters <empty> Call acceptance code of the Call Profile.
Max. no. of parallel ac-
cess
iNoOfChannels 1..99 1 The max. number of concurrent access to this profile.
Parameters if authori-
zation is insufficient
CallScr_Action s. description 0 The response of the system if the authorization is insufficient:
0: disconnect caller
1: play back announcement
2: dial subscriber
Ident. of announce-
ment if authorization is
insufficient
CallScr_Msg -1,
valid ident.
-1 The identifier of the announcement if the authorization is insuffi-
cient.
+ If CallScr_Action is set to 1, this value may not be
-1.
Ident. of subs. if au-
thorization is insuffi-
cient
CallScr_Subs -1,
valid ident.
-1 The identifier of the subscriber to be called if the authorization is in-
sufficient.
+ If CallScr_Action is set to 2, this value may not be
-1.
Ident. of the info mes-
sage played before
the dial-up.
iMsg_Pervious -1,
valid ident.
-1 The identifier of the information message played before the dial-up
phases.
Field name Keyword Value range Dflt. val-
ue
Description
Table 7-8 Data fields of the “Call Profile“ table