Home Security System User Manual

BHB_DATAIMPORT_07.fm
07/2010 DAKS OScAR-Pro-TT Dataimport-Tool, User Manual 7-19
For internal use only Description of INI files
Table fields
Dial-in parameters iDialInProps s. description 0 Bit mask of the conference dial-in parameters:
Bit 0: PIN required to convene
Bit 1: Convene only from 1st phone number of initiator
Bit 2: PIN required for active dial-in
Bit 3: Dialing from 1st phone number required for active dial-
in
Bit 4: PIN required for passive dial-in
Bit 5: Dialing from 1st phone number required for passive
dial-in
Bit 6: Active dialing subscriber becomes master
+ Bit 1 only if Bit 0 is set.
+ Bit 3 only if Bit 2 is set.
+ Bit 5 only if Bit 4 is set.
+ Bit 6 only if Bit 2 is set.
PC activity parameters iPcProps s. description 0 Bit mask of the parameters for PC activity during the conference:
Bit 0: PC logs conference start/end
Bit 1: PC also logs conferee states
Bit 2: Conf. can also be moderated via PC
+ Bit 1 only if Bit 0 is set.
+ Bit 2 only if Bits 1 and 2 are set.
ID to convene sIdLaunch 4 characters <empty> The ID to convene the conference.
ID for active dial-in sIdActive 4 characters <empty> The ID to actively dial into the conference.
ID for passive dial-in sIdPassive 4 characters <empty> The ID for the passive dial-in to the conference.
Display parameters iDispProps see Section
7.5.8, „Coding
of iDispProps“
0 Bit mask of the display texts, display numbers, and DTMF mes-
sage
Simulated substitute di-
aling
sNextDial 10 characters <empty> Simulated substitute dialing of the conference(<empty>=none).
Max. number of non-
predefined subs.
iMaxNoDialIn 0..60 0 Max. number of non-predefined dial-in subscribers
Field name Keyword Value range Dflt. val-
ue
Description
Table 7-6 Data fields of the “Conference“ table