Home Security System User Manual

Description of INI files For internal use only
07/2010
7-18 DAKS OScAR-Pro-TT Dataimport-Tool, User Manual
BHB_DATAIMPORT_07.fm
Table fields
Conference parame-
ters
iProperties s. description 0 Bit mask of the conference parameters:
Bit 00: Use Cornet-N(Q)® features
Bit 01: Monitor subscriber status
Bit 02: Is a high priority conference
Bit 03: Subscribers dialing in with PIN must be predefined
Bit 04: No audio signals during this conference
Bit 06: Conference is always active
Bit 07: Point-to-multipoint conference
Bit 08: End dial-up at first active subscriber reached
Bit 09: Master can manually extend conference
Bit 10: Delayed conference start
Bit 11: Alternative dialing of 1st and 2nd phone number
Bit 12: Switch to mute/active via DTMF enabled
Bit 13: Privacy during conference enabled
Bit 14: Called conferees join only after pressing * key
Bit 15: Queuing when dialing into non-active conference
+ Bits 06 and 07 are mutually exclusive.
+ Bit 11 only in combination with Bit 08.
+ Bit 05 of iProperties and Bit 01 iAddProps are
mutually exclusive.
Other conference pa-
rameters
iAddProps s. description 0 Bit mask of the other conference parameters:
Bit 00: Use priority (line 1) prefix in dial-up
Bit 01: Output user ID to all conferees
Bit 02: Accept dial-up of directory subscribers for Progressive
conferences and ad-hoc dialing via PC
Bit 03: Accept only dial-up of group members for Progressive
conferences and ad-hoc dialing via PC
Bit 04: Start conference by operator with call number dialing
Bit 05: Conference with point-to-multipoint functionality
Bit 06: Delayed dialing of non-masters
+ Bit 01 of iAddProps and Bit 05 of iProperties are
mutually exclusive.
Field name Keyword Value range Dflt. val-
ue
Description
Table 7-6 Data fields of the “Conference“ table