Home Security System User Manual

Program activation For internal use only
07/2010
4-6 DAKS OScAR-Pro-TT Dataimport-Tool, User Manual
BHB_DATAIMPORT_04.fm
The most important error messages during logon
4.6 The most important error messages during logon
The below list covers the most important error messages that may appear during the
logon:
Field Description
Unable to set up TCP/IP connection to OScAR-
Pro-TT Server.
Among other reasons, this message may surface
because:
– you entered a wrong IP address or IP
port
– the attempt to connect was forestalled by
a firewall on your local computer, on the
computer used for OScAR-Pro-TT Serv-
er, or along the route
– the application OScAR-Pro-TT Server is
not active
The attempt of the OpenScape Alarm Response
Professional to log on to OScAR-Pro-TT Server
with the assigned user name failed because an-
other application is already logged on with this
name.
The application is not enabled in the chipcard
data of OScAR-Pro-TT Server.
If this message appears, verify that:
– the OScAR-Pro server entered in OS-
cAR-Pro-TT Server is properly marked
as primary connection
– OScAR-Pro-TT Server has already been
connected successfully at least once
with the OScAR-Pro server (been ’on-
line’)
– you have acquired the application right-
fully and the chipcard of your OScAR-Pro
server is equipped with the pertinent en-
abled information
Table 4-2 The most important fault messages during logon