Data Sheet for Product

OpenAir
®
GPC Series, Spring Return, 35 lb-in, Rotary Electronic Damper Actuators Technical Instructions
Document Number 155-782
February 26, 2019
Siemens Industry, Inc. Page 3
Specifications, Continued
Control Signal
Input signal (wires 8–2)
voltage input signal (GPC16x.1P) 0(2) to 10 Vdc (max. 35 Vdc)
input resistance >100K ohms
Feedback Signal
Position output signal (wires 9–2)
voltage output signal (GPC16x.1P) 0(2) to 10 Vdc
maximum output current ±1 mA
Function
Running/spring return torque 35 lb-in (4 Nm)
Maximum torque 88 lb-in (10 Nm)
Runtime for 90°
operating with motor 60 seconds
closing (on power loss) with spring return 15 seconds typical
Mounting
Nominal angle of rotation 90°
Maximum angular rotation 95°
Shaft size 3/8 to 1/2-inch (8 to 13 mm) dia.
1/4 to 7/16-inch (6 to 11 mm) square
Minimum shaft length 3/4-inch (20 mm)
Housing
Enclosure NEMA 1
IP54
Material Plenum-rated rugged plastic
Gear lubrication Silicone-free
Ambient Conditions
Ambient temperature
operation –25°F to 130°F (–32°C to 55°C)
storage and transport –40°F to 158°F (–40°C to 70°C)
Ambient humidity (non-condensing) 95% rh
Agency Certification
UL listed per UL 60730
cUL to CSA 60730
NOTE: These devices were approved for installation in plenum areas by
Underwriters Laboratories, Inc. (UL) per UL 2043.
Conformity
FCC Conformity
Australia Conformity
EMC, ROHS2 and Low Voltage
Directives
Part 15 Class B Emissions
RCM Requirements
Miscellaneous
Pre-cabled connection 18 AWG (0.75 mm
2
)
Cable length 3 feet (0.9 m) length
Life cycle Designed for minimum of 100,000 full
stroke cycles and a minimum of 5
million repositions at rated torque and
temperature
Dimensions 5.61" H × 2.83" W × 2.48" D
(142.6 mm H ×72 mm W × 63 mm D)
Weight 1.32 lbs. (0.60 kg)