Presentation

Restricted © Siemens AG 2014 All rights reserved.
Page 9
Quality Assurance with 100% Actuator Factory
Testing
 Run torque at minimum rated operating voltage verification
 Stall torque verification
 Run time verification
 Power consumption- running and holding
 Also verifies wiring continuity and that cables attached correctly
 Potentiometer check- feedback
 Hi Pot testing for over voltage condition to check for shorts
 Run through entire range of travel - 0 to 95°
 Check mechanical spring return upon power loss
 Verify shaft connection sized (shaft adapter) are correct
 Scan bar code to verify control type on label matches control type actuator
produces.
 Modulating actuators given signals and checked to ensure reached
commanded position.