Technical data

Solutions

EN4442EN00EN_0002

Siemens

Exercises

10.7 Check the predefined profiles (SFM and MFM) for the Common

Gateway.

DISPLAY-BFDAT;

10.8 Create a Common Gateway with the HG3530 feature, 60 B

channels and 120 subsribers.

Remark:

Use a predefined Function Block.

Add two HFA phones.

Add the required parameter in the HFA phones with the help of the Config Menu of the

phone, WBM or DLS.

ADD-BCSU:MTYPE=IPGW,LTG=1,LTU=1,SLOT=14,PARTNO=Q2316-

X,FCID=1,FCTBLK=7,BCHL3530=60;

ADD-

CGWB:LTU=1,SLOT=14,SMODE=NORMAL,IPADR=1.40.11.50,NETMASK=255.255.255.0,DEFR

T=1.40.11.254,BITRATE=100MBFD;

REST-BSSU:ADDRTYPE=PEN,LTU=1,SLOT=14,

ADD-SBCSU:STNO=7180,PEN=1-1-14-

0,OPT=OPTI,CONN=IP2,COS1=33,COS2=30,LCOSV1=9,LCOSV2=1,LCCOSD1=9,LCOSD2=1,ST

D=100;

ADD-SBCSU:STNO=7181,PEN=1-1-14-

1,OPT=OPTI,CONN=IP2,COS1=33,COS2=30,LCOSV1=9,LCOSV2=1,LCCOSD1=9,LCOSD2=1,ST

D=100;

If the VNR feature is activated, the complete number(virtual node code and extension number)

and the DPLN group (if overlapping) must be used!