Technical data

Command Line Interface CLI at HG 3500
EN4442EN00EN_0001
© 2007 Siemens AG
Siemens
41
/evtlog/evtlog.txt
/evtlog/evtlog.bak
7.6 Maintenance
The maintenance commands permit the current operational status of the gateway to be
inspected, and provides access to diagnostic tools and interface and gateway controls.
Display
● Commands which provide information on the gateway’s software configuration:
show version
show uptime
● Display of IP-address, subnet and gateway:
show all parameters
● Display of hostnames and IP-addresses:
show host
● Get the name of the gateway:
show hostname
● Display of arp-cache:
show arp cache
It is also stored in the bootline as targetname.
● Display of the IP address and subnetmask for the ethernet port:
show ip address
show ip subnet
● Showing the time will display the time and the date:
show time
● Command to get the IP address of the default gateway from the static routes table:
show default gateway
● Command to display the static routes entries:
show routes
● To display the statistics of the interface table: