Technical data

Multiple-Feature Configuration

EN4442EN00EN_0002

Siemens

CHANGE-BFDAT:CONFIG=CONT,FCTBLK=4,FUNCTION=HG3550,LINECNT=1,UNITS=1;

>>>>> WAML with one unit (=10 B channels)

CHANGE-BFDAT:CONFIG=CONT,FCTBLK=4,FUNCTION=WAML;

>>>>> HFA with 70 circuits and 70 B channels

CHANGE-BFDAT:CONFIG=CONT,FCTBLK=4,FUNCTION=HG3530,LINECNT=70,BCHLCNT=70;

>>>>> Do not end configuration of block

CHANGE-BFDAT:CONFIG=OK,FCTBLK=4,ANSW=NO;

Assignment for functional block 4

ADD-BCSU:TYPE=IPGW,LTG=1,LTU=1,SLOT=43,PARTNO=Q2316-X10,FCTID=1,FCT-

BLK=4,IPADDR=198.16.16.43;

H500: AMO BCSU STARTED

F89: THE GIVEN FUNCTIONAL BLOCK IS NOT COMPLETELY CONFIGURED.

PLEASE FINISH CONFIGURATION BY MEANS OF AMO_BFDAT FIRST.

AMO-BCSU -54 BOARD CONFIGURATION, SWITCHING UNIT

ADD NOT COMPLETED;

6.6.2 Completed configuration block

>>>>> End configuration of block

CHANGE-BFDAT:CONFIG=OK,FCTBLK=4,ANSW=YES;

If the configuration of a functional block with the AMO BFDAT is not completed, the

block cannot be assigned to any board with the AMO BCSU.

The functional block must be completely configured with the AMO BFDAT before the

command can be successfully run.