Technical data

Multiple-Feature Configuration

EN4442EN00EN_0002

Siemens

AMO CGWB not necessary because the IP address is already configured with the AMO BCSU.

The additional configuration of the IPDA (UCSU, APRT etc) must be done as before in HiPath

4000 V30.

6.4 Configuration of a HFA phone

Configuring HFA subscriber on the STMI2 board in 1-1-31 (BFDAT profile 2):

ADD-CGWB:LTU=1,SLOT=31,SMODE=NORMAL,IPADDR=198.16.16.54,NET-

MASK=255.255.255.0;

REST-BSSU:ADDRTYPE=PEN,LTU=1,SLOT=31,

ADD-SBCSU:STNO=7180,PEN=1-1-31-0,OPT=OPTI,CONN=IP2,COS1=33,COS2=30

,LCOSV1=9,LCOSV2=1,LCCOSD1=9,LCOSD2=1,STD=100;

6.5 Configuring SIP Trunking

Configuring SIP trunking on the STMI2 board in 1-1-61 (BFDAT profile 3):

ADD-CGWB:LTU=1,SLOT=55,SMODE=NORMAL,IPADDR=198.16.16.55,NET-

MASK=255.255.255.0,TRPRSIP=30;

The additional configuration of the IP Trunking Connection must be done as before in HiPath

4000 V30.

6.6 Completed and Uncompleted Functional Block

6.6.1 Uncompleted functional block

Functional block 4: Adding the functions IPDA (HG3570), IP trunking (HG3550), WAML and

HFA subscriber (HG3530)

ADD-BFDAT:FCTBLK=4,FUNCTION=HG3570&HG3550&WAML&HG3530,BRDBCHL=BCHAN120;

>>>>> IPDA with 30 B channels

CHANGE-BFDAT:CONFIG=CONT,FCTBLK=4,FUNCTION=HG3570,BCHLCNT=30;

>>>>> IP trunking with one circuit and one unit (=10 B channels)

Only one trunking protocol can be configured for each common gateway board.