Technical data

Multiple-Feature Configuration

EN4442EN00EN_0002

Siemens

Functional block 3

Functional block 3: IP trunking, HFA subscriber function (HG3530) and reserve HFA subscriber

(HG3530R)

ADD-BFDAT:FCTBLK=3,FUNCTION=HG3550&HG3530&HG3530R,BRDBCHL=BCHAN120;

>>>>> HFA with 80 circuits with 80 B channels and 20 reserve B channels

CHANGE-BFDAT:CONFIG=CONT,FCTBLK=3,FUNCTION=HG3530,LINECNT=80,BCHLCNT=100;

>>>>> Reserve HFA subscriber with 20 circuits

CHANGE-BFDAT:CONFIG=CONT,FCTBLK=3,FUNCTION=HG3530R,LINECNT=20;

>>>>> IP trunking with 10 circuits with one unit (=10 B channels)

CHANGE-BFDAT:CONFIG=CONT,FCTBLK=3,FUNCTION=HG3550,LINECNT=10,UNITS=1;

6.2 Configuring the Common Gateway Board with the AMO BCSU

Assignment for functional block 1

ADD-BCSU:TYPE=IPGW,LTG=1,LTU=2,SLOT=37,PARTNO=Q2316-X10,FCTID=1,FCT-

BLK=1,IPADDR=198.16.16.45;

Assignment for functional block 2

ADD-BCSU:TYPE=IPGW,LTG=1,LTU=1,SLOT=31,PARTNO=Q2316-X10,FCTID=1,FCT-

BLK=2,IPADDR=198.16.16.31;

Assignment for functional block 3

ADD-BCSU:TYPE=IPGW,LTG=1,LTU=1,SLOT=61,PARTNO=Q2316-X10,FCTID=1,FCT-

BLK=7,IPADDR=198.16.16.59;

Converting reserved HFA circuits to usable circuits

CHANGE-BCSU:TYPE=IPGW,LTG=1,LTU=1,SLOT=61,CHNGRSLN=13;

6.3 Configuration of a IPDA

Configuring of an IPDA on the STMI2 board in 1-1-37 (BFDAT profile 1):

The reserved HFA B channels must be specified during configuration of the HG3530

function as subscriber B channels are not accepted during reservation.